DIN 2391 冷拔或冷轧精密无缝钢管生产标准 Pt1&Pt2 下载
冷拔精密无缝钢管 Precision cold drawn seamless steel tube
DIN2391钢管的主要用途
液压系统用钢管,汽车用钢管,广泛用于液压系统用钢管、注塑机用钢管、液压机用钢管、船用钢管、EVA发泡油压机械、精密油压裁断机用钢管、制鞋机械、液压设备、高压油管、液压油管、卡套接头、钢管接头、橡胶机械、锻压机械、压铸机械、工程机械、混泥土泵车用高压钢管、环卫车用、汽车行业、造船工业、金属加工、军工、柴油机、内燃机、空压机、建筑机械、农林机械等。
DIN2391钢管的化学成分
牌号 | 化学成分(%) | ||||
---|---|---|---|---|---|
C max | Si max | Mn | P max | S max | |
St 35 | 0.17 | 0.35 | ≥0.40 | 0.025 | 0.025 |
St 45 | 0.21 | 0.35 | ≥0.40 | 0.025 | 0.025 |
St 52 | 0.22 | 0.55 | ≤1.60 | 0.025 | 0.025 |
Steel grade | 化学成分(%) | ||||||
---|---|---|---|---|---|---|---|
Steel name | Steel number | C max | Si max | Mn | P max | S max | Al min |
E215 | 1.0212 | 0.10 | 0.05 | 0.70 | 0.025 | 0.025 | 0.025 |
E235 | 1.0308 | 0.17 | 0.35 | 1.20 | 0.025 | 0.025 | - |
E355 | 1.0580 | 0.22 | 0.55 | 1.60 | 0.025 | 0.025 | - |
DIN2391精密钢管的机械性能
Steel grade | 冷拔光亮硬态 BK | 冷拔光亮硬态 BKW | 拉拔光亮 消除应力退火 BKS | 退火 GBK | 正火 NBK | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
常用钢号 | 抗拉强度Rm N/mm min | 伸长率% min | 抗拉强度Rm N/mm min | 伸长率% min | 抗拉强度Rm N/mm min | 屈服强度 ReH N/mm min | 伸长率% min | 抗拉强度Rm N/mm min | 伸长率% min | 抗拉强度Rm N/mm min | 屈服强度 ReH N/mm min | 伸长率% min |
St35 E215 | 480 | 6 | 420 | 10 | 420 | 315 | 14 | 315 | 25 | 340-470 | 235 | 25 |
St45 E235 | 580 | 5 | 520 | 8 | 520 | 375 | 12 | 390 | 21 | 440-570 | 255 | 21 |
St52 E355 | 640 | 4 | 580 | 7 | 580 | 420 | 10 | 490 | 22 | 490-630 | 355 | 22 |
DIN2391精密钢管的英文说明:
DIN 2391 applies to seamless precision steel tubes and in compliance with ISO/DIN 3304, those tube dimensions have been selected from the range of manufacture dimensions which are mainly used as design elements.
If tubes having the tolerances and are produced according to the technical conditions of deivery as specified in this Standard are to e used as pipelines, then the dimensions specified in DIN 2448 may from time to time be used. These tubes must be ordered according to quality grade C.
DIN 2391 Pipe Seamless Precision Steel Tubes Size:
Outside Diameter (Nominal Size ): 4 - 260 mm
Wall Thickness: 0,5 - 25 mm
Delivery condition:BK ,BKW,BKS,GBK,NBK
Application: Industrial and Mechanical, Automotive
Notes:
- Steel grades: St 35, St 45, St 52
- Length up to 9 m.
- Test certificates according to DIN EN 10204.
DIN 2391 Seamless Precision Steel Tubes Mechanical Properties (Mpa)
DIN 2391 Seamless Precision Steel Tubes Chemical composition(%)
Note: a: Cold-finished/hard b: Cold-finished/soft c: Annealed d: Normalized |
Delivery status | Abbreviation | Description |
Cold-finished/hard (Cold-finished as-drawn) | BK | No heat treatment after the last cold-forming process. The tubes therefore have only low deformability. |
Cold-finished/soft (lightly cold-worked) | BKW | After the last heat treatment there is a light finishing pass (cold drawing) With proper subsequent processing, the tube can be cold-formed (e.g. bent, expanded) within certain limits. |
Annealed | GBK | After the final cold-forming process the tubes are annealed in a controlled atmosphere or under vacuum. |
Normalized | NBK | The tubes are annealed above the upper transformation point in a controlled atmosphere or under vacuum. |
DIN2391精密钢管的相关文件PDF格式下载:
EN-10305+DIN-2391_Seamless_precision_steel_tubes.pdf
EN-10305-1_DIN-2391_UNI-7945-79_Seamless_precision_steel_tubes 性能参数对照表.pdf
DIN 2391 与 EN 10305-1 性能对比.pdf